HomeMy WebLinkAboutPR 24717: PURCHASING OF CHEMICAL PUMPS FOR THE WATER TREATMENJT PLANT City of
'r—
„rr rthu r
Texas
INTEROFFICE MEMORANDUM
Date: December 23, 2025
To: The Honorable Mayor and City Council
Through: Ronald Burton, CPM, City Manager
From: Calvin Matthews, P.E., Director of Utilities
RE: PR 24717—Purchasing of Chemical Pumps for the Water Treatment Plant
Introduction:
The intent of this Agenda Item is to seek City Council's approval to purchase(6)Watson Marlow
peristaltic chemical pumps and(10)replaceable pump heads with Environmental Improvements
Inc. of Houston, TX, in the total amount of$49,585.00. This is a sole-source provider and is
considered to offer a fair and reasonable price for the required work.
Background:
The Water Treatment Plant operates several chemical feeding pumps that are responsible for
treating drinking water. The existing pumps are over 11 years old and require upgrades and
replacement to significantly increase reliability for processes that ensure continuous public
health and safety, as well as to facilitate integration into the existing System Control and Data
Acquisition program in use. Environmental Improvements Inc. of Houston,TX has provided a
sole-source quote for(6)Watson Marlow peristaltic chemical pumps and(10)replaceable pump
heads in the amount of$49,585.00.
Budget Impact:
Budget impact is $49,585.00 for the chemical pumps and replaceable pump heads at the Water
Purification Plant. Funding is available in Account No.410-40-210-5318-00-00-000,Equipment
Maintenance.
Recommendation:
It is recommended that the City Council approve P. R. No. 24717, authorizing the purchase of
chemical pumps and replaceable pump heads at the Water Treatment Plant as described and
outlined above.
"Remember,we are here to serve the Citizens of Port Arthur"
P. R.No. 24717
12/22/2025 CS-TNR
RESOLUTION NO.-
A RESOLUTION AUTHORIZING THE CITY MANAGER
TO PURCHASE SIX (6) WATSON MARLOW
PERISTALTIC CHEMICAL FEED PUMPS AND TEN (10)
REPLACEABLE PUMP HEADS FROM SOLE SOURCE
PROVIDER ENVIRONMENTAL IMPROVEMENTS, INC.
OF HOUSTON, TEXAS, IN AN AMOUNT NOT TO
EXCEED $49,585.00. FUNDING IS AVAILABLE IN
ACCOUNT NO. 410-40-210-5318-00-00-000 (EQUIPMENT
MAINTENANCE).
WHEREAS, the City's Water Treatment Plant relies upon chemical feed pumps to
properly treat drinking water and ensure compliance with public health and safety standards; and
WHEREAS, the existing chemical feed pumps have been in service for more than eleven
(11) years, have exceeded their reliable functional lifespan, and are in need of replacement to
maintain operational integrity and system reliability; and
WHEREAS, replacement of these pumps will significantly improve reliability for critical
treatment processes and will allow seamless integration with the City's existing System Control
and Data Acquisition(SCADA) system; and
WHEREAS, Environmental Improvements, Inc. of Houston, Texas has provided a sole-
source quotation for six (6) Watson Marlow peristaltic chemical feed pumps and ten (10)
replaceable pump heads in the total amount of$49,585.00, attached hereto as Exhibit"A"; and
WHEREAS,Environmental Improvements,Inc.has demonstrated a history of dependable
service to the City and is the sole authorized provider for this equipment; and
WHEREAS, the City Council finds that this purchase is necessary and in the best interest
of the City to ensure the continued safe and reliable treatment of the City's drinking water supply.
NOW THEREFORE,BE IT RESOLVED BY THE CITY COUNCIL OF THE CITY
OF PORT ARTHUR,TEXAS:
P. R.No. 24717
12/22/2025 CS-TNR
THAT,the facts and opinions in the preamble are true and correct; and,
THAT, the City Manager is hereby authorized to purchase six (6) Watson Marlow
peristaltic chemical feed pumps and ten (10) replaceable pump heads from Environmental
Improvements,Inc. of Houston,Texas,in the total amount not to exceed$49,585.00(Exhibit"A");
and,
THAT, this purchase shall be funded by the Utility Operations Account No. 410-40-210-
5318-00-00-000 (Equipment Maintenance); and,
THAT a copy of the caption of this resolution be spread upon the minutes of the City
Council.
READ, ADOPTED AND APPROVED THIS day of , 2026
at a Regular Meeting of the City Council of the City of Port Arthur, Texas,by the following vote:
AYES: Mayor ;
Councilmembers:
NOES:
Charlotte M. Moses
Mayor
ATTEST:
Sherri Bellard
City Secretary
P. R. No. 24717
12/22/2025 cs
Page 3 of 3
APPROVED AS TO FORM:
Roxann Pais Cotroneo
City Attorney
APPROVED FOR ADMINISTRATION:
-trx
Ronald urton, C
City Manager
Ji .ei Y1,z411,
Suhail Kanwar, P.E.
Director of Public Services
Calvin Matthews, P.E.
Water Utilities Director
APPROVED AS TO THE AVAILABILITY
OF FUNDS:
Lynn yn) Boswel , MA ICMA-C
Finance Director
,(- AA:
Clifton . Williams Jr. CPPB
Purchasing Manager
Exhibit "A"
(Sole Source Letter and Quote)
:WATSON
MARLOW
Innovation in full flow. . .
Watson-Marlow Bredel Alitea Flexicon MasoSine
To Whom It May Concern From Bill Schiller
Copies Date 16 OCT 2025
Subject Environmental Improvements, Inc.
Exclusive Representation in State of Texas
This memo will confirm to all parties that Environmental Improvements, Inc. (E12) is the exclusive environmental
representative for Watson Marlow Pumps Group in the state of Texas. This includes the municipal, state, and federal
water and wastewater treatment markets for all Watson Marlow tubing pumps and Bredel hose pumps.
Should you wish to contact Environmental Improvements, Inc., please do so at one of the following offices:
•Environmental Improvements, Inc. Environmental Improvements, Inc.
1183 Brittmore, Suite 100 517 North Kealy
Houston, TX 77043 Lewisville, TX 75057
713-461-1111 972-436-2536
blake(a ei2water corn fwillmsIa ei2dallas.corn
Environmental Improvements, Inc.
235 Trademark Drive
Buda, TX 78610
512-295-3733
phenegar(c�ei2austin.com
Please do not hesitate to contact me if you need further assistance.
I
Regards.
111/.91a.
William D. Schiller
District Sales Manager. Environmental Division
Office: 281-890-6290
Fax: 281-890-6235
Cell: 713 299 5455
bschiller(c�wmbpumps.corn
Watson-Marlow, Inc. •37 Upton Technology Park • Wilmington, MA 01887•www.watson-marlow.com• (978)658-6168
2
environmental EI
improvements Inc.
1183 Brdtmoore RD 100 Quotation
Houston.TX 77043
ph 713.461.1111
Customer: City of Port Arthur DATE: 1/12/26
Attn: Jeff Wyble DELIVERY: 3-4 Weeks
Phone: (409)548-1076 TERMS: Net 30
Email: jeff.wvbleatportarthurtx.Qov FOB: Factory
We are pleased to have the opportunity to offer you the following quotation.Please sign and fax back
along with your purchase order or alternate method of payment.
;Item Qty Article Part Number Description unit Extended
Coagulant
1 2 0M6.605T.GRA Watson Marlow Qdos H-Flo(Drive Only) $ 7,210.00 $ 14,420.00
115VAC,Universal+Controls 4-20mA
2 4 0M3.8200.PFP ReNu 600 pumphead Santoprene(158 GPH) $ 785.00 $ 3,140.00
/PFPE 5 bar(36 psi)
Sodium Hydroxide
3 2 0M6.605T.GRA Watson Marlow Qdos H-Flo(Drive Only) $ 7,210.00 $ 14,420.00
115VAC,Universal+Controls 4-20mA
4 4 0M3.7200.PFP ReNu 300 pumphead Santoprene(79.4 GPH) $ 785.00 $ 3,140.00
/PFPE 5 bar(36 psi)
Polymer(Emulsion)
5 2 0M0.355L.GRA Qdos 60 PU Universal+ $ 5,350.00 $ 10,700.00
115VAC, 15.9 GPH,at 75 PSI
6 2 0M3.3500.PFP ReNu pumphead-Spare-PU Tubing w/PFPE $445.00 $ 890.00
7 1 Freight Freight&Tariff to Port Arthur $ 2,875.00 $ 2,875.00
Total $49,585.00
By signing below you authorize Environmental Improvements,Inc.to provide the above mentioned
items.
Thank you,
Blake Roye
Signature
Date
Print
Austin Dallas Houston Tulsa
qdos 20 30 60, 120 and CWT qdc)s
•
.
Perh taltic Metering
--FEATURES AND BENEFITS Watsor1-Marlow Pumps.
• Flow rates 0.1-2000m1/min (0.001-31.7USGPH) and up to ,i,_
7 bar(100psi) RMS pressure , •
32 A .
• ReNu pumphead provides accurate, linear and repeatable flow : Y^ A
• Process uptime is maximised with no gas-locking, no valve,,. -•-
blocking and rapid no-tools pumphead replacement '$
• Fluid recovery ensures operator safety and avoids chemical waste
• Flow control up to 20000:1 with ±1%accuracy #:.
• Manual, analogue, PROFIBUS or contact mode functionality
available
• PROFIBUS Bus speed 9.6-1,500 kb/s
• Compatible with 12-24V DC I� /�
}`y,2 [{YEAR S
lsokr_/ a m...(maua ion 61 Full RRailT
V vGt
PERFORMANCE
qdos pump typical flow rates
qdos I qdos remote
Speed(rpm) Flow ml/min(USGPH)• Speed(rpm) Flow ml/min(USGPH)•
qdos 20 0.017-55 0.1-333(0.001-5.3) 0 034-55 0.2.333(0.003-5.3)
qdos 20 PU 0.017.55 0.1484(C.001-7.67) NA NA
qdos 30/qdos CWT 0.025-125 0.1-500(0.001-7.93) 0.078-125 0.3-500(C.005-7 93)
qdos 60 0.013-125 __ _ 0.1-1000(0.001-15.85) 0.078-125 0.6-1000(0.01-15.85)
qdos 120 0.006-125 0.1.2000(0.001-31.7) 0.078-125 _1.25-2000(0.02-31.7)
*accuracy±1%,repeatability±0 5%
Flow rate with discharge pressure for ReNu pumpheads
Suction gauge Discharge gauge Suction gauge Elscharge gauge
pressure/psi pressure/psi pressure/psi pressure/psi
-15 -10 -5 0 0 20 40 60 80 100 -15 -10 -5 0 0 20 40 80 00 100
2200 '
22000 { --- ,r 2000 !� 30 2000
'32
— 1600
1800 ��—28 1800
2630
2g
1400 22 �, 140Q
20 ] E — gdos�0- — gdos30- �22
▪ 1200 c z 1200 —Santoprene orSE85—. Santoprene -.20
ar ° e ' 18 a or Tubn Tubin On 18 a+
., 1000 -xa a_..> gym.,; - 18 .* 1000 _ 9 _ 9 b —.18
A —14 m
800 Santoprene or 3
4 o SE85 Tubing Santoprene 100 0 o soD qdos OMIT — qdos OW 10 ;
0
w G00 u (r 8 LL 800 Fe
400 PU Tubing 8 400 3
200 2 200 f2
-1 -0.5 0 0 1 2 3 4 5 8 7 -1 -0.5 0 0 1 2 3 4 5 8 7
Suction gauge Discharge gauge Suction gauge D scharge gauge
pressure/bar pressure/bar pressure/bar aressure/bar
qdos 120 qdos 30/qdos CWT
i gdos 60
qdos 20
I,qdos 20 PU
K" `i *' 0 ' - . • - .- • _ . . ,
qdos 20 qdos 30 qdos 60 I qdos 120 qdos CWT
Ingress rating IP66
Enclosure Watertight/dustproof
Humidity Non-condensing 5%-95%
Temperature(Santoprene) N/A 5C-45C(41 F-113F) N/A
Temperature(SEBS and PU) 5C-40C(41F-104F) N/A N/A
Temperature(EPDM) N/A 5C-40C(41F-104F)
Drive weight 4.6 kg(101b 2oz) 4.1 kg(91b 1oz) 4.6 kg(10ib 2oz)
Pumphead weight 1.1 kg(2Ib 7oz) 0.95kg(21b 2oz) 1.1kg(2lb 7oz) 2.2kg(4Ib 140z)
Control ratio±1%accuracy 3330:1 5000:1 10000:1 20000:1 5000:1
Control ratio(Remote) 1600:1 N/A
Noise <70dB(A)at lm
Standard CE,NSF 61,cETLus,IRAM 5 Mark,C-Tick,CSA
Switch mode power supply
-100-240V 50-60Hz 190VA
Country specific plug options
Power supply options 12-24v DC power supply
Typical 12V current(100W).10A
Typical 24V current(100W)=SA
Terminal connectors:M8(5/16")studs(hole diameter 8.33mm(0.328")
MATERIALS OF CONSTRUCTION
Component Material
qdos 20 I qdos 30 I On 60 I qdos 120 I qdos CWT
Keypad Polyester
Drive casework 20%Glass filled PPE/PS
Drive shaft Stainless steel 440C
Pumphead enclosure 30%Glass filled PPO/PS I 40%Glass filed PPS 130%Glass filled PPO/PS 40%Glass filled PPS
Rotor PP(gdos 20 PU)/Glass Glass filled nylon Stainless steel
filled nylon
Rotor bearings Steel,stainless steel(optional—contact Watson-Marlow applications)
Tube* PU(max 4 bar.60 psi)/ ll I Santoprene(max 7 bar,100 psi)/SEBS(max 4 bar,60 psi) N/A
SEBS(max 7 bar,100 psi)
Membrane* N/A [Polypropylene
111 EPDM
puomphead hydraulic PVDF(SEBS or PU) I Polypropylene(Santoprene)1 Polypropylene(Santoprene)or I Polypropylene Polypropylene(Santoprene)
or PVDF(SEES) PAN(SEES) I(Santoprene)
ene) or PVDF(SEES)
Hydraulic connectors Polypropylene(standard)PVDF(optional)
Lubricant* PFPE based
*It is the users responsibility to comply with local health and safety regulations,including ensuring chemical compatibility between the duty fluid,the tube and lubricant
contained in the ReNu Pumphead.For guidance refer to www.gdospumps.com.
TECHNICAL DATA .
1
Operational modes Manual Remote PROFI11U5 Universal UMversal+
Manual • •
PROFTBUS—bus speed 9.6-1,500 kb/s •
Contact • •
4-20mA •
Fault reporting • _ •
Features Manual Remote PROFIhUS Universal Universal+
Numerical flow display •
Numerical speed display •
•
•
Fluid level monitor ' •
•
Ii
Max(prime)
Auto restart(after power restored) • _ •
Fluid recovery
Leak detection • •
3.5"(88.9mm)colour TFT display • j - •
LED Pump status icons •
f
E NICAt •A A C e HUED _ " .-
Control methods Manual Remote PRORBUS Univerftl Universal*
Input/Output Options* L L L or I I.or R
Manual control capability i • _ i
4-20mA input • • -"J
4-20mA Input two point calibration ,
4-20mA output •
Contact Input(pulsefbatch) •L or 1 •I.or R
0 Run stop input •
Run status output L
Alarm output L
Four configurable relay outputs R
Remote fluid recovery • •
PRORBUS Manual Remote PROFtsUs Universal Universal.
Speed set point
0 Speed feedback
Flow calibration function •
--N-
Hours run
Revolution counter
0 Leak detection
Low fluid level alarm
Diagnostic feedback •
1 Security Manual Remote PROFIBUS Untwesfal Universal*
Keypad lock • •
PIN lock to protect set up •
Power supply options Manual ; Remote PROFIBUS Unlvemal Universal+
12-24V DC • '
I
-100-240V AC j '
•Control options-Universal and
Universal.models
Variant Standard pump(L)
Input 5-24V DC
Output Open collector
Variant Relay Module(R)
,Input 5-24V DC or 110V AC
Output Contact rating
110VAC,4A
30V DC,4A
Y t 9 $
R A
�' ;: _ !� "
H
{ eii
7
I
li. 1-4( I
kk
B D F
Note:Pumphead appearance and fluid port positions may differ between models.
Modal A R C D E-Optional f 6 H I
relay modules
(H or R)
qdos 20 234mm(9.2) 214mm(8.4") 104.8mm(4.11 266mm(10.5") !43mm(1,7") 173mm(6.8') 40mm(1.6'} 140mm(S.5') 10mm(0.4")
i •
qdos 30 234mm(9.2") 214mm(8.4") 71,5mm(2.8") 233mm(9.2") i 43mm(1.7") 173mm(6.81 40mm(1.6") 140mm(5.5") lomm(0.41
r
qdos 60 234mm(9.2") 214mm(8.41 104.8mm(4.1") 266mm(10.5") i 43mm(1.T) 173mm(6.8") 40mm(1.6") 140mm(5.5") lomm(0.41
qdos 120 234mm(9.2") 214mm(8.4") 104.8mm(4.11 266mm(10.5") i 43mm(1.7") 173mm(6.8") 40mm(1.6") 140mm(5.51 10mm(0.4")
I I
galas CWT 234mm(9.2) 1214mm(8.4") 117.9mm(4.6") 291 rnm(11.5") 143mm(1.7") 173mm(6.8") 40mm(1.6") 140mm(5.51 lomm(0.4")
ORDER INFORMATION
0 M 0 • • • • G • •
Moroi Model Plug options
' .7;;0..2' Fluid path Inateriali ,. ti,.,,,., .y '.'1; a-
.•c: !: tla-mat Pttmphea0 L.Eurt-. ,, t For guidance on chemical o
- F,.,. compatibility see
4. r - >t orientation' l7
m R .. wvrN.gdospumps tom A
F, IP1:;; I_ 1... Is. i•„i o
,.,
Digital I/O typo -. v
Manual,Remote and PROFIBUS models ~
73
universal and Universal.model. Pumphead product codes T.
3
; Description Partcode o
••Iss.,Ar ",,,,, ReNu 20 pumphead PU/PFPE 4 bar(60ps1) 0M3.1500.PFP 7
ReNu 20 pumphead SEBS/PFPE 7 bar(100psi) DM3.1800.PFP o
v,
ReNu 30 CWT pumphead EPDM/PEEK/PFPE 7 ar(100 psi) 0M3.5700.PFP 3
ReNu 30 pumphead Santoprene/PFPE 7 bar(11)psi) 0M3.2200.PFP ry
ReNu 30 pumphead SEES/PFPE 4 bar(60ps1) 0M3.2800.PFP ry
ReNu 60 pumphead Santoprene/PFPE 7 bar(1appsi) 0M3.3200.PFP cn
*The pumphead side location Is required when ordering.The left/right ReNu 60 pumphead SEBS/PFPE 4 bar �'
perspective assumes the user Is looking at the front of the pump.The pump P P (60ps1) 0M3.3800.PFP c
in the dimensions diagram Is considered a pumphead located to the left. ReNu 120 pumphead Santoprene/PFPE 4 bar(Cps') 0M3.4200.PFP tJ
AN flow rates shown were obtained pumping water at 20C(68F)with zero suction and delivery heads.qdos drives are i ; g,
not ATEX rated and should not be used within explosive atmospheres. r
wmftCCm
Disclaimer.The information contained in this document is believed to be correct but Watson-Marlow Limited accepts ".<., u-
..-.. �. -...,.= y
in
no liability for any errors it contains and reserves the right to alter specifications without notice.It is the users f_ ;.; 0 M' info@wrnftg.como
responsib airy to ensure product sultabiFh�yy for use within their application.Watson-Marlow,Qdos,ReNu,LoadSure. C +44(0)1326 370370 7
of a...w�"..........�.."...d.......o .r w�""..�u.1... i...a...• rr•e,me en,w a er•n,lee or'c,w.... ,C.,F,:,,•_.»
0
c2azi ..
Qdos H - FLO tyl il F=L.0 W
Pumps
Qdos metering pump .
Features and benefits
• Qdos*H-FLO offers flow rates up to 600 L/h and pressure capability up to 7 bar
• RFID Pumphead detection ensures confirmation of correct pumphead ., -
• Revolution counter for pumphead service maintenance
• One common pump drive with several pumphead options for changing
process conditions and chemistries AO
▪ Network integration,control and communication options include EtherNet/IP, it
PROFIBUS and PROFINET
• Optional pressure sensing kit with configurable alarms for process monitoring - _
4
Performance (Maximum)
Pumphead Flow rate Discharge pressure Fluid temperature
ReNu 150 Santoprene 150 L/h(39.6 USGPH) 7 Bar(100 PSI) 45°C(113°F)
ReNu 300 Santoprene 300 L/h(79.4 USGPH) 5 Bar(73 PSI) 45°C(113°F)
ReNu 300 SEBS 300 L/h(79.4 USGPH) 4 Bar(58 PSI) 40°C(104°F)
ReNu 600 Santoprene 600 L/h(158.5 USGPH) 2.5 Bar(36 PSI) 45°C(113°F)
Performance curve
inlet pressure PSI Discharge pressure PSI
-15 -10 -5 0 0 20 40 60 80 100
-175
600
150
500
-125
d
CO
- 100 y
7
m tu
300 75 a
ReNu 300 sei..3:,, tc
Se
Santoprene or ""`""'`"
200 SEBS -50
100 ReNu 150 -25
Santoprene
0 .- I
-1 -0.5 0 0 1 2 3 4 5 f 7
Inlet pressure bar Discharge pressure bar
EN-US-Version 2.0
v-
Technical Specification
Max,flow rate 1 600 L/h
Max.flow rate' 158.5 USGPH
Min.flow rate' 0.12 L/h
Min.flow rate' 0.032 USGPH
Max.operating pressure 2 7 bar
Max.operating pressure 2 100 PSI
Ambient Temperature Range 4 to 45°C
Ambient Temperature Range 39 to 113°F
Weight 3 15 kg
Weight 3 33 lbs
Control types Manual,Universal,Universal+,EtherNet/IP,PROFIBUS,PROFINE'
Power supply 100-240 VAC 50-60 Hz 350 VA
Ingress rating IP66,NEMA 4X
humidity 80%up to 31 °C,88°F,decreasing linearly to 50%at 40°C,104°t
Noise <70dB(A)at 1 m
Max.altitude 2000 m
Standards UL 61010-1:2012 Ed.3,CAN/CSA-C22.2 NO.61010-1-12(R2022),E71160204-1:2018,
CC 47CFR(Part 15),EN 61326-1:2021,EN 301 489-1 (17), NSF 61,IkoHS, PSE
'Minimum and maximum flow depends upon pumphead,flow unit and method of control.
2 Maximum pressure depends upon pumphead
3 Combined weight of drive with pumphead fitted,maximum for range shown
Qdos H-FLO dimensions
;1 • . _ =w.:
• gin:
Q m E o_......r,,....F-,.s_ zN. K
H 7...
I F �
• F - • I •
C •
- D C; 1 •
A B C D E F
mm in mm In mm in mm in mm in mm in
276.0 10.866 35.0 1.378 224.0 8.819 260.0 10.236 33.7 1.327 !91.5 11.476
G H I J K L
mm in mm in mm in mm in mm in mm in
380.0 14.961 118.7 4.673 334.3 13.161 394.2 15.520 332.3 13.083 432.0 18.976
EN-US-Version 2.0
V'
Control options
Operational modes Manual Universal Universal+ EtherNet/IP PROFIB S PROFINET
Manua' • • • • • •
Bus Network Communication • • •
Contact mode • •
4-20 mA • •
Fault reporting • • • • • •
\ Features Manual Universal Universal+ EtherNet/IP PROFIB S PROFINET
R9D pumphead detection • • • • • •
11 Numerical flow display • • • • • •
Numerical speed display • • • • • •
Fluid level monitor • I • • • •
Max(prime) • • • • • •
Auto restart(after power restored) • • • • • •
Fluid recovery • • • • • •
Leak detection • • • • • •
5"(127 mm)colour TFT display • • • • • •
Pressure sensing(optional • • • • •
pressure sensor)
IControl methods Manual Universal Universal+ EtherNet/IP PROFIB • PROFINET
Input/Output options M or T M or T M M M
11 Manual control capability • • • • • •
4-20 mA input&calibration • •
4-20 mA output •
111 Contact input(pulse/batch) • •
Pressure Sensor input(pressure • • • • •
sensor purchased separately)
IManual speed adjustment range* 1900:1 1900:1 1900:1 1900:1 1900:1 1900:1
Minimum drive shaft adjustment
speed increment 0.1 0.1 0.1 0.1 0.1 0.1
4-20 mA resolution 2184:1 2184:1
Run stop input • • • • •
Run status output • •
Alarm output • •
Two configurable relay outputs • • • • •
Four configurable relay outputs •
Remote fluid recovery input • • • • •
*Speed adjustment range depends upon pumphead chosen,maximum shown
III EtherNet/IP,PROFIBUS and Manual Universal Universal+ EtherNet/IP PROFIB S PROFINET
PROFINET functions
Speed set point • • •
Speed feedback • • •
Flow calibration function • • •
Hours run • • •
Revolution counter • • •
�■1 Leak detection • • •
Low fluid level alarm • • •
Diagnostic feedback • • •
Pressure sensing(optional • • •
pressure sensor)
Security Manual Universal Universal+ EtherNet/IP PROFIB S PROFINET
Keypad lock • • • • • •
PIN lock to protect setup • • • • • •
Input/Output control connection options-Universal and Universal+models only
M:M12 connectors T:User-wired cable gland conn tors
Input Analogue:4-20 mA,Digital:24V IEC61131-2 Type 3 Analogue:4-20 mA,Digital:24V IEC61131-2 T iiie 3,AC:110VAC
IIOutput Analogue:4-20 mA,Digital:Relay-CO 1A 24VDC Analogue:4-20 mA,Digital:Relay-CO SA 110 •C,SA 30VDC
EN-US-Version 2.0
t�.
Materials of construction
Wetted by Potential of Potential of
the process being wetted by being wetted by
fluid the operating operating the
environment or pumphead to
a spillage the point of
tubing failure
Pumphead
Part Material
ReNu Santoprene ReNu SEBS
Santoprene SEBS • • •
GF PP PVDF ■ ■ •
Fluid path
PVC-U • • •
FKM • • •
GFPPE+PS • •
PC • •
NBR • •
Pumphead enclosure • •
Stainless steel
Santoprene • •
PP • •
GF PA6 •
Santoprene •
HDPE •
Pumphead internals •
Steel
Silicone •
PFPE based lubricant •
Polyester •
Information labels
PET •
Drive
Part Material
GF PPE+PS •
PC •
Polyester •
PA6 •
NBR •
Drive enclosure Silicone •
Santoprene ■
Stainless steel •
Zinc alloy,nickel plated, •
(M12 connector(M)model only)
FKM(M12 connector(M)model only) •
Polyester •
Information labels PET •
Power cable(product code PVC(outer sheath) •
ending in A)
Power cable(product code PCP(outer sheath) •
ending in B,C,D,E,K,R,U)
Drive internals Mixture of materials,including Aluminium*
*The drive enclosure has been tested to IP66 and NEMA 4X.Chemical incompatibility with any of the above lisle materials,physical
damage,misuse or failure to follow Watson-Marlow instructions could result in loss of ingress protection and ex ose the internal
components of the drive to chemicals used in the fluid path or environment.Aluminium contained within the dri,e may react
aggressively with these chemicals.
EN-US-Version 2.0
Drive product code
0 M 6 6 0 G
E � ■ C 7
A B C D
Input/Output Pumphead •wer plug
Model connectors orientation p 9
3:Manual Models:Manual,PROFIBUS, L:Left A: S
4:Universal EtherNet/IP,PROFINET R:Right B: :razil
5:Universal+ models C: ' iss
7:PROFIBUS D: dia,South Africa
8:EtherNet/IP M:M12 Connectors E: t ropean
9:PROFINET K: ustralia
Models:Universal, R: rgentina
Universal+ U: K
M:M12 connectors
T:User-wired cable gland
connectors
Pumphead product code
Description Pr'duct code
ReNu 150 pumphead Santoprene/PFPE 7 bar(100 psi) ,M3.6200.PFP
ReNu 300 pumphead Santoprene/PFPE 5 bar(73 psi) 1M3.7200.PFP
ReNu 300 pumphead SEBS/PFPE 4 bar(58 psi) 1 M3.7800.PFP
ReNu 600 pumphead Santoprene/PFPE 2.5 bar(36 psi) iM3.8200•PFP
Disclaimer:
All flow rates shown were obtained pumping water at 20°C(68°F}with zero suction and delivery heads.The information contained in is document is believed
to be correct but Watson-Marlow Limited accepts no liability for any errors it contains and reserves the right to alter specifications wit •ut notice.It is the user's
responsibility to ensure product suitability for use within their application.Watson-Marlow,LoadSure.Rumps'',PureWeld XL,Bioprerie Marprene are registered
trademarks of Watson-Marlow Limited.Tn-Clamp is a registered trademark of Alfa Laval Corporate AB.GORE and STA•PURE are regist ed trademarks of W.L.
Gore and Associates,Please state the product code when ordering pumps and tubing.
wmfts.com/global
❑•'• 0
'._4 •
FL. o.
18 July 2023
EN-US-Version 2.0